Honeywell HPFF12 Proprietary Power Supply

Model: HPFF12

Category: Fire Power & Relays, Fire Power Supplies

Brand: Honeywell Power Products

Dealer pricing

The Honeywell HPFF12(E) and HPFF12CM(E) are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF12 and HPFF12CM connects to any 12 or 24V Fire Alarm Control Panel (FACP) or operates stand-alone. They provide regulated and filtered 24VDC power to four NAC's and an auxiliary output. The NAC outputs are rated at 3.0 amps each and the auxiliary output is rated at 2.0 amps (this output is continuously supplied, even in alarm, and therefore must be taken into account for power supply loading and battery size calculations).

The combined output cannot exceed 12.0 amps. The HPFF12 and HPFF12CM provide independent output circuit supervision so in the event of a NAC fault they can notify the attached FACP. In addition they have a trouble memory feature that displays past troubles (by NAC) for rapid diagnostics. Synchronization is built in for five appliance brands. The HPFF12 and HPFF12CM have two fully independent supervised initiating circuits that can be used for synchronized strobes and coded horns. Their NAC outputs may be configured as any of the following:

The Honeywell HPFF12 and HPFF12CM are Notification Appliance Circuit (NAC) Expander Power Supplies designed to extend the power capabilities of existing NACs and provide power for auxiliary devices. The HPFF12 and HPFF12CM connects to any 12 or 24V Fire Alarm Control Panel (FACP) or stand alone.

HPFF12: 12.0A fire rated power supply. Unit includes red enclosure, battery cable and installation instructions. 120VAC/ 60Hz.

Main Features

  • Primary Input Power: 120VAC, 60Hz, 5.4A standard; 240VAC, 50Hz, 3.2A on units with E suffix.
  • Secondary Power: 24 volt operation: two 7-24 AH batteries.
  • Battery Charging Capacity: Up to 26 AH batteries.
  • HPFF12 Cabinet: Holds up to two 18AH batteries.
  • HPFF12CM: Holds up to two 12AH batteries.
  • Total Output Current: 12.0A max.
  • Standby Current: 0.075 A.
  • Auxiliary Power Output: 2.0A under all conditions.
  • NAC Output Ratings: 24VDC fully regulated, 3.0A max per circuit (12.0A total).
  • End-of-Line Resistor Range: 1.9K to 25k ohm, ½ watt. Product ships with 4 separate programming resistors. They are 3.9K (5 each - only need one for programming), 2.2K (1 each), 4.7K (1 each) and 10K (1 each)
  • Common Trouble: 2.0A at 30VDC.
  • Relay Fail Relay: 2.0A at 30VDC.
  • Input Control Circuits: compatible with 12 and 24 VDC control panel NACs.
  • Input Control Current (alarm): 5.68 mA @ 12 VDC, 12.28 mA @ 24 VDC.
  • Temperature Rating: 32°F to 120°F (0°C to 49°C).
  • Relative Humidity: 10% to 93% non-condensing.
  • Cabinet Dimensions:HPFF12 Cabinet: 16.65" W x 19.0" H x 5.2" D (42.29 W x 48.26 H 13.23 D cm) Large equipment enclosure (EQBB-D4): 24" W x 45.9" H x 5.15" D (60.96 W x 116.52 H x 13.1D cm)

Alarm Overload
Brand Name Honeywell
Category Type Fire Power Supplies
Compatibility

Fire Alarm

Depth 5.2"
Form Factor Wall Mount
Height 19", 5.2"
Input Current 5.4 A @ 110V
Input Voltage 110 V AC
Input Voltage Type AC
Manufacturer Honeywell International, Inc
Model HPFF12
Output Voltage 24 V DC @ 3 A
Product Type Proprietary Power Supply
Protection Type Overload
Rack Width 19"
Vendor Name Honeywell Power Products
Width 16.7"