Honeywell HP600ULX Proprietary Power Supply

Model: HP600ULX

Category: Access Power Supplies

Brand: Honeywell Power Products

Dealer pricing

The HP600ULX is a 12VDC or 24VDC power supply with AC fail and Battery fail supervision. The unit has not been evaluated as elevator equipment, and is not authorized for bell output in Mercantile applications.

Main Features

  • Input voltage: 120VAC 60Hz; Current: 2.50A max.
  • Output Voltage: 12VDC or 24VDC, jumper selectable; Current: 6.0A continuous output maximum plus battery charger (not supervised).
  • Fail safe dry contact output on AC Failure (within one minute)
  • Built-in charger for sealed lead acid or gel cell type batteries.
  • Instantaneous transfer to stand-by battery on AC failure.
  • Battery presence detection (within 1 minute).
  • Battery low disconnect at 9.90VDC or 19.90VDC.
  • High voltage disconnect at 15VDC or 30VDC.
  • Yellow LED (L3) indication for battery disconnected and battery low.
  • Fail safe dry contact output for Battery trouble (Fail Safe).
  • Battery polarity reversal protection.
  • Thermal overload and short circuit protection.
  • DC output PTC activated indication by Red LED (L2).
  • DC output failure indication by Red LED ( L4 ).
  • AC presence indication by Green LED ( L1 ).
  • DC output indication by Red LED ( L5 ).
  • Battery Leads included.
  • Power Board Dimensions: 6.2”L x 4.7”W x 2.5”H.
  • Enclosure Dimension: 17”L x 13.5”W x 4.75”H. Accommodates two 12 Volt 12AH batteries. When using larger batteries, a UL approved enclosure must be used.

Brand Name Honeywell
Form Factor Wall Mount
Height 4.8", 13.5"
Input Current 2.5 A @ 110V
Input Voltage 110 V AC
Input Voltage Type AC
Manufacturer Honeywell International, Inc
Model HP600ULX
Output Voltage 12 V DC @ 6 A, 24 V DC @ 6 A
Product Series HP-UL
Product Type Proprietary Power Supply
Protection Type Short Circuit, Thermal Overload
Width 17"