The SF337C Emergency Shower Switch is for any location where activation of an emergency signal is required. The design is such that it may be located anywhere in a shower, bath or tub room, regardless of environmental conditions. The combination of rubber-grommetted mounting screws, rubber mounting gasket, and completely sealed front faceplate make it waterproof (if properly installed). Electronic components are mounted on a circuit board, including an industry-proven reliable reed switch for circuit initiation. The activating magnet is mounted on the large pull-down lever, which is completely sealed in plastic. The indicator LED is also completely sealed.
Due to the flexibility of its design, the SF337C may be used as a pull cord or as a pull down activated emergency switch. The pull cord supplied may be used for emergency call activation, or if desired, the large 1.1" (28 mm) red pull-down lever may be used. Dome light and system annunciation vary according to the manner in which the SF337C is connected.
Main Features
- UL® 1069 Listed
- Waterproof if installed per manufacturer’s instructions
- Call-placed indicator
- Call cancel at point of origin
- Attractive, flame-retardant (UL® 94V-0) plastic faceplate
- 1.1" (28mm) wide pull-down lever
- Washable TPU plastic pull cord kit is included
- Dimensions: Height 4.5" (114.3 mm) Width 2.8125" (71.4 mm) Overall Depth 1.75" (44.4 mm)
- Projects Front: 0.71" (18 mm); Projects Rear: 1.04" (26.4 mm)
- Construction: Flame-retardant (UL® 94V-0) plastic
- Connections: Plug-in type
- Flush Housing: Single-gang ring with square box; for Tek-CARE500 use plastic single gang box with minimum 2.875"× 2.125" opening.
- Surface Housing: TekTone IH527 plastic back box for TekCARE500.
