QSC AcousticCoverage AC-S6T 2-way Indoor Surface Mount, Wall Mountable Speaker - 30 W RMS

Wide Area Paging ? Background Music ? Office Buildings ? Healthcare Facilities ?Concourses ? Transportation Terminals ? Ancillary Support in Larger Systems

The QSC AcousticCoverageTM AC-S6T is a surface mounted 6.5" two-way loudspeaker with 70/100V transformer, suitable for a wide variety of voice paging and background music sound reinforcement applications.

AcousticCoverage is designed to offer integrators a cost effective solution for
applications where voice reinforced coverage is of primary concern, while providing improved musicality often not seen in typical BGM class products.

A high quality 165 mm [6.5 in] polypropylene cone transducer with butyl rubber surround and a 25 mm [1 in] aluminium dome tweeter offers pristine clarity through the critical vocal range for increased speech intelligibility. With 130
degrees of conical coverage, the AC-S6T reduces the number of loudspeakers
required for even coverage in close proximity.

The UV treated high impact ABS enclosure and ported baffle assembly has been
optimally tuned for added musicality, creating low frequency extension down to
60 Hz. To maintain this frequency response, the AC-S6T utilizes a 30-watt low-
saturation and low-loss 70/100V transformer with varying selectable taps,
including an 8? bypass.

To further enhance performance and speed of install with optimum result, advanced voicing via QSC Intrinsic Correction techniques are obtainable using Q-Sys networked audio processing platforms, including CXD amplifiers for a complete QSC systems solution.

Installers will appreciate the 4-pole Euroblock connector for loop thru wiring,
located on the rear of the enclosure. Eliminating the termination hassles of star
topology wiring designs, the generous Euroblock of the AC-S6T can accept four
18AWG pairs.

The AC-S6T features brass inserts to accept the included yoke mount and is secured using the supplied thumb bolts. The grille is adorned with a spring loaded and rotatable logo for installation convenience in either horizontal or vertical deployments.

The AC-S6T is available in white (RAL 9010) or black (RAL 9011) to match
complimenting QSC product families . The AC-S6T may also be painted to match any décor.