Qolsys IQ Hardwire 16-F

Model: QS7133-840

Category: Wireless Intrusion Accessories

Brand: Qolsys Inc

Dealer pricing

The IQ Hardwire 16-F (Small Enclosure) offers a cost effective way of integrating hardwired security & smoke detector zones with the IQ Panel 2/2+. It includes a small enclosure designed to be mounted in an existing can, backup battery charging, 500mA of 12volt auxiliary power, an onboard siren relay, built-in status LED’s for each zone and support for up to 10 two-wire smoke detectors. Normally Open and Normally Closed contacts are supported as well as powered zones like motion sensors and glass break detectors.

Main Features
  • Small small plastic enclosure designed to be mounted in an existing can
  • Encrypted S-Line sensor technology protects signals sent to the IQ Panel while still providing support for legacy 319.5 systems
  • Supports up to ten two wire smoke detectors
  • LED lighted zones for ease of “learn-in” installation/troubleshooting
  • EOL supervision using 4.7K Ohm resistors (included) or 1k-10k Ohm depending on Resistor Mode
  • Up to 500 Milliamps of power for hardwired motion detectors, glass break detector, and/or sirens
  • Charging circuit for back-up battery, fully supervised with power outage recovery
  • Input Zones: 15 N/O or N/C
  • Smoke Zone: 1 two-wire smoke loop, 10 detectors max. Support for System Sensor® 2W-B, 2WT-B, 2WTA-B* (*Detector models should not be mixed)
  • Dimensions: 5.5” X 3.5”

Brand Name Qolsys
Category Type Wireless Intrusion Accessories
Compatibility
Depth 3.5"
Device Supported Siren, Door Contact, Glass Break Detector, Motion Detector, Siren, Smoke Detector, Door Contact, Glass Break Detector, Motion Detector, Smoke Detector
Diameter 5.5"
Height 5.5"
Manufacturer Qolsys Inc
Model QS7133-840
Product Type Wire-to-Wireless Converter
Vendor Name Qolsys Inc
Width 3.5"

Not found