SWM Series Mount
WALL MOUNT, SPECTRA®, DF5, AND SARIX® ID AND IE SERIES PENDANT DOMES
Product Features
- For Use with Pelco Pendant Domes (Spectra®, DF5, and Sarix® ID and IE Series) that Require a 1.5-inch NPT Pipe Thread for Installation
- Low Cost
- Constructed of Cast Aluminum
- Cable Feedthrough Features
- Supports up to 4.5 kg (10 lb)
- Easy to Install, Using a Mounting Plate and Standard Tools
- Mounting Hardware is Concealed Within the SWM, Providing a Very Attractive Appearance
- Mounts Directly to a Vertical Load-Bearing Surface for Wall Mount Applications
- Can be used with the SWM-PA Series Pole Adapter or SWM-CA Series Corner Adapter
- For Indoor or Outdoor Applications
The
SWM Series indoor/outdoor wall mounts are designed primarily for use with Pelco pendant domes including Spectra®, DF5, and Sarix® ID and IE Series. They can also be used with other pendant domes that require a 1.5-inch NPT pipe thread for installation. Its unique design conceals the mounting bolts inside the mount, provid-ing a clean and aesthetically pleasing appearance. It is easy to install and requires no special tools. A gasket is affixed to the base to protect the interior from moisture.
A feedthrough opening in the mounting surface allows for easy routing of video and power cables. Because of its compact size, the mount is not suitable for use with conduit fittings. A 1.5-inch NPT pipe thread is provided in the mount to attach the pendant dome. For Sarix installations, the SWM Series wall mounts require a Sarix pendant mount adapter: the ID-P is required for Sarix ID Series domes, and the IE-P is required for Sarix IE Series domes.
Accessories for the wall mount include the
SWM-PA Series pole adapter and the
SWM-CA Series corner adapter. The corner adapter allows the wall mount to be attached to the corner of a building. The
SWM-CA24 corner adapter includes a 100 VA transformer that converts 120 or 230 VAC input to 24 VAC output. When installed with Sarix IE Series domes, the power from the
SWM-CA24 mount is used for the dome heater.
The wall mount and adapters are constructed of aluminum with a polyester powder coat finish. The wall mount is available in gray, light gray, black, or white. The pole adapter is available in gray, black, or white. The corner adapter is available in gray or white.
