Optex BX-80NR Motion Sensor

The BX-80NR is quick and easy to install. This unit requires no complicated wiring as it is a battery operated PIR detector. Not only does one save on installation time and cost, but an added benefit of the unit is its slick design that blends in with any architecture. The BX-80NR offers flexible features. It can easily be added on to any wireless system which has already been installed as this unit is effective with any manufactures' transmitter and receiver. In addition, this high-tech detector, designed to be wall-mounted centrally on a building, is a new concept in outdoor protection as it increases the effectiveness a security system.

Animal tolerant and very stable

The BX series is very stable to use in outdoor environment with small animal around. The sensor sends infrared beams on each side, both the top and bottom of the sensor. The beams need to detect a presence to trigger so a bird or a cat sitting on the window seal will not set the alarm off. Additionally, the BX-80 has extra features such as double conductive shielding, advanced temperature compensation and size judging function to provide reliable and stable detection.

The convenience of "wireless"

The BX-80R doesn't require any cable or wire at all to be installed. The low-current sensor is powered by batteries (not provided) which can last up to 3 years and has a backbox big enough to accommodate most wireless transmitters available on the market. The BX-80NR can be easily added onto a wireless alarm panel and extend the protection of the house or building to the outside.

Applications

• Buildings
• House
• Garage

Key Features

• Curtain detection left and right
• Adjustable detection range from 2 to 12m
• Animal tolerant
• Battery-operated suitable for wireless transmitters