- Category
- Brands
- Become a customer
- Contact Us
- Security Cameras Distributor
- 3000 High Ridge Rd, Boynton Beach, FL 33426
Model: SE-10SW
Category: Subwoofers
Brand: Oem Systems
Dealer pricingThe STUD Woofer 10" In-Wall Subwoofer fits in standard 2"x 4" walls. It fastens directly to 16" O.C. wall studs so it will not work itself loose from the drywall.
It does not require any special cabinet or bracing, it is entirely retrofit-able. It was designed to be installed in standard 2"x 4" or 2"x 6" walls with 1/2" drywall without any need for reinforcement, blocking, etc.
The SE-10SW is a single channel model. One may be driven directly by an amplified Mono low pass signal or two separate units may be driven by amplified Stereo low pass signals. The SE-10SW may be fitted with a 10-MX passive crossover for use with amplifiers that lack electronic crossovers or when creating a passive Subwoofer/Satellite system.
| ADI Part Number | OE-SE10SW |
| Brand Name | OEM Systems |
| Category Type | Subwoofers |
| Driver Type | 10" Polypropylene Woofer |
| Environmental Certification | RoHS |
| Environmentally Friendly | Yes |
| Form Factor | In-wall |
| Impedance | 8 Ohm |
| Limited Warranty | Lifetime |
| Manufacturer | OEM Systems Company, Inc |
| Model | SE10SW, SE-10SW |
| Material | Polypropylene |
| Maximum Frequency Response | 200 kHz |
| Minimum Frequency Response | 25 Hz |
| Operating Power Consumption | 250 W |
| PMPO Output Power | 250 W |
| Product Type | Woofer |
| RMS Output Power | 125 W |
| Sensitivity | 87 dB |
| Vendor Name | Oem Systems |
| Width | 10" |
Not found
