NVT Phybridge NV-217J-M Passive Video Transceiver w/ RJ45 UTP Connection

The NVT Model NV-217J-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) data wire. Baseband (composite) signals of any type are supported.

The passive NV-217J-M features a RJ45 connection and Male BNC allowing connection directly to the camera or DVR. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT’s passive products for applications under 750ft (225m). The NV-217J-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.

The unparalleled interference rejection and low emissions of the NV-217J-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.

Main Features

• Full-motion CCTV video at distances up to 750ft (225m) when used with any Passive NVT Transceiver or hub
• Up to 1,500 feet (460m) shall be supported by any NVT StubEQTM Hub
• Up to 3,000 feet (1,000m) with a DigitalEQTM Hub or NVT Active Receiver
• Frequency response DC to 10MHz
• Male BNC allows connection directly to the camera or DVR
• RJ45 UTP terminal connection
• No power required
• Exceptional interference rejection
• Built-in transient protection
• Supports “up-the-coax” type control signal up to 750ft (225m)
• Limited lifetime warranty