Oxygen O2 Zero Air Calibration 34L 20.9% v/v (M)
Oxygen O2 Zero Air Calibration 34L 20.9% v/v (M)

Oxygen O2 Zero Air Calibration 34L 20.9% v/v (M)

Model: 37-0472-4031-1

Category: Testing Equipment

Brand: Macurco (aerionics)

Dealer pricing

The Macurco 6 & 12 Series detection family requires routine testing and calibration.
Each detector has a corresponding testing/calibration kit to test and calibrate the
detectors in the field. Sensors may drift over time so it is recommend to have a
maintenance plan to ensure detectors responding to gas appropriately. A gas calibration
is the process of exposing a sensor to a target gas at a specific concentration and then
adjusting the gas detector to read that gas concentration properly.

Macurco recommends testing and calibration at a least once per year at a minimum but depending on the application and risk potential of the application a greater frequency might be needed.

Main Features

  • Used with Macurco Cal-Kit 1
  • Works with OX-6, OX-12
  • Size: 10.6” x 3.1” x 3.1” (27 x 7.9 x 7.9 cm)
  • Weight: 2 pounds (0.9 kg)

Vendor Name Macurco (aerionics)

Not found

recommended items