KBC Networks FDVA1-DB1-M1R-MSA Video Console

Features:

• Multimode Fiber Receiver
• Single Channel Video over One Fiber
• Casing: Compact Module
• Power Type: US Type 2 Pin
• 8 bit digitally-encoded, non-compressed video transmission
• Directly compatible with NTSC, PAL and SECAM CCTV camera systems
• Wide optical dynamic range. No adjustment is required
• LED indicators provide quick diagnosis of all important system parameters
• Switchable 120Ω termination and biassing
• Up to 14 receivers in one 3U chassis
• Compact, wall-mount and 3U chassis card configurations

The KBC FDVA-DB1 series uses the most advanced digital technologies to provide excellent repeatable performance for todays CCTV systems. It supports transmission of one analog composite video channel and one bi-directional data channel over one multimode or singlemode optical fiber. PAL, NTSC and SECAM video standards are fully supported and the data channel supports all standard PTZ (Pan-Tilt-Zoom) control signals. The plug-and-play design ensures ease of installation with no electrical or optical adjustment needed. LED indicators are provided to clearly show the operational status of the unit. The series is available in compact or 3U chassis card.

• Model Number- FDVA1-DB1-M1R-MSA
• No. of Channels- 1
• Input/Output- 1.0V pk-pk typical, 75Ω
• Bandwidth- 5 Hz ~ 6.5 MHz
• Digital Encoding (non compressed)- 8 bit
• Differential Gain (10-90% APL)- <2.0%
• Differential Phase (10-90% APL)- <2.0°
• SNR- >60dB
• Data Formats- RS232, RS422, RS485 (2W & 4W)
• Number of Two-way Channels- 1
• RS232 Data Rate- DC 115.2 kbps
• RS422/485 Data Rate- DC 250 kbps
• Bit Error Rate-
• Encoding Schemes- Manchester, Bi-Phase, NRZ, NRZI
• Optical Wavelength- 1310nm / 1550nm
• Fiber Type- Multimode
• Number of Fibers- 1
• Power Input- 12-24 Vac/dc @ 200mA
• Operating Temperature- -40°~+70°C / -40°~+158°F
• Operating Humidity- 0 to 95% non-condensing
• Dimensions- 70mm x 61mm x 44mm (2.8 x 2.4 x 1.7)
• Video- BNC 75Ω
• Fiber Connector- ST
• Power- Screw Block Terminal