Honeywell Home 7847i-E is our newest IP Communicator and it is designed to meet today’s demand for viable communication alternatives.
The 7847i-E is suitable for enterprise private network applications using local LAN or point to point connections. This easy-to-install device provides sophisticated data security and communicates directly to a 7810PC or 7810iR-ent Intranet receiver in a private network application.
- Secure IP Reporting
- Reports signals via Internet or Intranet (7847i-E only)
- Uses 256-bit Advanced Encryption Standard or optional 1,024 bit encryption with two-way authentication and no key exchange for maximum data protection
- Dialer Capture Ready
- Compatible with Dialer Capture Intelligence Device (non-ecp capable LYNX) or DCID-EXT (other control panels). Captures Contact ID messages from the panel’s phone line and sends them to the central station via the IP communicator.
- Universal Control Panel Compatibility
- Flexible modes of operation allow ECP full alarm reporting by Honeywell Home control panels, 4204 relay mode for Honeywell Home controls that do not support ECP alarm reporting and zone triggering for use with other control panels
- Full Contact ID or ADEMCO High Speed Reporting
- ECP mode with compatible Honeywell Home control panels support full Contact ID reporting. All other modes use ADEMCO High Speed reporting format.
- Six Input Zones
- Each zone can be configured for +V, -V, or EOLR triggering. Each zone can be programmed for inverted operation, delayed reporting and restoral reporting. Zone 1 can distinguish between pulsed and steady inputs (7847i/7847i-E).
- Tamper Protected Enclosure
- Built-in tamper sends a report when a tamper condition is detected and a restore when cleared
- Remote Services Capability*
- Control Honeywell Home control panels via Internet or mobile device and e-mail notification of system events.
* Requires optional Resideo Total Connect®Remote Services
- Network Friendly
- Installs behind firewalls without compromising network security— dynamic or static IP addressing
- Ease of installation
- Easy CAT-5 100 BaseT connection to a hub or router-Quick connection to compatible Honeywell Home series control panels
- Simple programming using a 7720P programmer or the AlarmNet360 website
- Upload/Download
- With select Honeywell Home control panels. Requires Compass version 1.5.8.54a or higher.
