Hochiki DCP-AMS-KL Pull Station

The DCP-AMS are the Hochiki America series of addressable manual pull stations that provide a fast and practical means of manually initiating a fire alarm signal. Both single action and dual action manual pull stations are available. Resetting of the pull station requires either a Cat 30 key or a 1/8" hex key (depending upon the model used).

An alarm condition is actuated by pulling down on the handle of the DCP-AMS and DCP-AMS-KL single action models. On the dual action models DCP-AMS-LP and DCP-AMS-KL-LP the Lift and Pull cover must be lifted before pulling down on the pull station handle. Once the pull station is activated, the handle cannot be put back into a normal standby condition without using the key operated reset feature.

Features

• Addressable integrated design
• All metal construction
• Single and dual action models available
• Extremely easy to operate
• Bi-colored status LED indicates Standby and Alarm conditions
• Address is programmable in EEPROM
• Address can be programmed when installed
• Key lock or hex key lock models available
• Enclosed switch with glass rod (included)
• Terminals accept up to 14AWG wire
• Surface mount back box available
• ADA compliant (except LP models)