GRI 289-4 Pool Alarm

The GRI DOOR ALERT/POOL ALARM uses a microprocessor to monitor the CLOSED LOOP magnetic reed switches, shunt/cancel button, battery and power supply voltages, and to provide the timing options. The re- cessed versions are designed to fit inside a single gang utility box, while the surface mount versions may easily be mounted to the wall of any structure.

The 289-1 and 289-2 versions offer a seven second delay in which an adult may open the protected door, shut it, and then press the shunt/ cancel button without the alarm sounding.

The 289-3 and 289-4 versions alarm instantly if the protected door is open before the shunt/cancel button is pressed.

All versions must be operated with a 12 volt externally supplied DC power source. An onboard 9 volt battery can be used, in which case the battery will perform a backup function should the externally supplied source fail for any reason. The GRI DOOR ALERT/POOL ALARM is designed to maintain a minimum sound pressure level.

• ETL Tested To Be In Compliance With Standard for Safety,
• UL 2017, and Florida Building Commission Code
• Requirements, Per ETL Listing Number 3035022
• Exceeds Operational Requirements of Model Barrier Codes
• Microprocessor Controlled
• Monitors Entry to Pool and Spa Areas
• Instant On Or 7 Second Delay Models Available
• Surface or Flush Mount Models
• 15 Second Adult Shunt
• Built-in Back-up Battery Capable
• Must Be Hard Wired To Remote 12 Volt maximum 500 mA Source or To Plug In Power Source.
• Applied Voltage Must Not Exceed 15 VDC. Battery for Backup Only.