Fire-Lite MMF-300(A) Monitor Module
Fire-Lite MMF-300(A) Monitor Module

Fire-Lite MMF-300(A) Monitor Module

Model: MMF-300

Category: Fire Control Panels, Fire Control Accessories

Brand: Fire-lite Alarms By Honeywell

Dealer pricing

The MMF-300(A) Monitor Module is intended for use in intelligent, two-wire systems, where the individual address of each module is selected using the built-in rotary switches. It provides either a two-wire or four-wire fault-tolerant Initiating Device Circuit (IDC) for normally-open-contact fire alarm and supervisory devices. The module has a panel-controlled LED indicator. The MMF-300(A) can be used to replace M300(A) modules in existing systems.

MMF-300(A) is a standard-sized module (typically mounts to a 4" [10.16 cm] square box) that supervises either a Style D (Class A) or Style B (Class B) circuit of dry-contact input devices.

Main Features

  • Built-in type identification automatically identifies this device as a monitor module to the control panel.
  • Powered directly by two-wire SLC loop. No additional power required.
  • High noise (EMF/RFI) immunity.
  • SEMS screws with clamping plates for ease of wiring.
  • Direct-dial entry of address: 01 – 159 on MS-9600 series panels, 01 – 99 on other compatible systems.
  • LED flashes during normal operation and latches on steady to indicate alarm.

Brand Name Fire-Lite
Category Type Fire Control Accessories
Depth 1.3"
Device Supported Control Panel
Features LED Indicator
Height 4.5"
Input Voltage 32 V DC
Manufacturer Fire-Lite Alarms, Honeywell International, Inc
Model MMF-300
Maximum Operating Range 4"
Maximum Operating Temperature 120°F (48.9°C), 120.2°F (49°C)
Minimum Operating Temperature 32°F (0°C), 32°F (0°C)
Product Type Input Monitor Module, Fire Alarm Control Panel, Alarm Control Panel Monitor Module
Vendor Name Fire-lite Alarms By Honeywell
Width 4", 1.3"

recommended items