Fire-Lite ANN-I/O LED Driver Module
Fire-Lite ANN-I/O LED Driver Module

Fire-Lite ANN-I/O LED Driver Module

Model: ANN-I/O

Category: Fire Control Panels, Remote Fire Annunciators

Brand: Fire-lite Alarms By Honeywell

Dealer pricing

The ANN-I/O is an LED driver module that can be used in a wide variety of applications including as an interface with the Fire Alarm Control Panel (FACP) to drive most customized graphic annunciators. It comes in a plastic enclosure that may be mounted inside a custom annunciator or accessory cabinet and can drive up to 40 LEDs.

The ANN-I/O and the FACP communicate over a two-wire serial interface employing the ANN-Bus communication format. An additional two wires are used for 24-volt DC power. A single four-conductor unshielded cable may be used for both power and data communications.

Up to eight ANN-Bus devices may be connected to the ANN-Bus of each FACP.

Main Features
  • ANN-I/O connects to the ANN-Bus terminal on the FACP and requires minimal programming
  • Each ANN-I/O module drives up to 40 LEDs
  • Programmable to indicate activity for points or zones
  • Compatible with the ES-50X, ES-200X, MS-9600(UD)LS, MS-9200UDLS, MS-9050UD, MRP-2001, MRP-2002, MS-5UD, and MS-10UD
  • Can be remotely located up to 6,000 feet (1,829 m) from the panel
  • May be powered by 24 VDC from the host FACP or by remote power supply (requires 24 VDC)
  • Up to eight ANN-Bus devices may be connected to the ANN-Bus of each FACP

Brand Name Fire-Lite
Category Type Remote Fire Annunciators
Compatibility
Depth 7.8", 1.5"
Height 6"
Input Voltage 24 V DC
Limited Warranty 3 Year
Manufacturer Honeywell International, Inc, Fire-Lite Alarms
Model ANN-I/O
Maximum Operating Temperature 120°F (48.9°C)
Minimum Operating Temperature 32°F (0°C)
Product Type Fire Alarm Control Panel, Annunciator Driver Module, FACP LED Driver Module
Vendor Name Fire-lite Alarms By Honeywell
Width 7.8", 1.5"

Not found

recommended items