Cornell 4201B/V Call Station, with Audio Alarm and One Momentary Switch with LED Light, Two Gang, Vandal Resistant

CallStation, with speaker on Two Gang, Vandal Resistant and a LED light incased in the switch

The Cornell Emergency Station with speaker is a must-have for nursing homes, senior care facilities, hospices, psych wards, schools, university campuses and more. This station allows residents, students, or patients to make contact with facility staff right from their bed or other designated emergency areas. This station is designed with advanced technology to perform long-term under intense conditions. The two-gang plate emergency call system is vandal resistant in the event of external emergency situations.

Residents or facility staff can communicate with other emergency stations with a simple push of the button. The button will flash when the signal is received by other emergency stations, allowing staff to tend to emergency situations without the chaos of alarms, blaring walkie-talkies, or dated intercom systems.

Description:

The Cornell 4200 series call stations work with Cornell’s 4200 Rescue Assistance system to initiate a call to the master panel when the button is pressed, opening up a voice communication from master panel to station.

Operation:

The call station has an LED illuminated switch that when pressed, initiates a call to the master panel and illuminates the LED on the call station.

Station Options:

• The 4201B/V is the basic station with an LED light encased in the switch.
• Vandal resistant screws are available as an additional option for all three stations.

Mounting:

The satin finish stainless heavy-duty steel faceplate with silk-screened designations is to be flush mounted on a standard outlet box with a dual-gang plaster ring. Field wiring is provided by a pigtail connector.

Engineering Specifications:

The CORNELL Call Station, Model 4201B/V, shall consist of one momentary switch with an LED, and one audible alarm with a sound level minimum of 70db at 30cm. The station shall be wall mounted on a dual-gang stainless steel plate that is vandal resistant.

Technical Information:

• Power Requirements: 24VDC
• Operating Environment: 50°-120°F Indoor Non-condensing for standard station
• -22°-158°F for weatherproof station
• Physical Faceplate Dimensions: 4 ½ ”H x 4 ½ ”W (Standard 2 Gang)
• Mounting: Dual-Gang back box with 1¾” minimum depth
• Wiring: #22 AWG Minimum, #16 AWG Maximum