- Category
- Brands
- Become a customer
- Contact Us
- Security Cameras Distributor
- 3000 High Ridge Rd, Boynton Beach, FL 33426
Model: PHC030
Category: Surge Protection & PDUs
Brand: Asco Power Technologies
Dealer pricingThe Edco PHC Series is designed to protect two pairs of wires specifically for alarm and security systems where operating currents can be as high as 5 Amps. Electrically, the Edco PHC Series is a rugged series hybrid implementing a staged complement of MOVs, copper wound inductors and Silicon Avalanche Diodes. This design reduces series resistance to 0.2 ohms per pair. These products are intended to mate with an Edco PCB1B-WKEY gold-plated female terminal connector.
The Edco PHC modules plug into a base assembly (Edco PCB1B-WKEY). The base assembly can be mounted to any flat surface and should be located as close as practical to the protected equipment. Terminal 1 and/or terminal 10 should be connected to Building-Approved Ground with 12 or 10 gauge solid wire.
| ADI Part Number | EL-PHC030 |
| Brand Name | ASCO, Edco |
| Category Type | Surge Protection & PDUs |
| Dataline Protection | Datacommunication |
| Depth | 2.4" |
| Height | 3.7" |
| Limited Warranty | 5 Year |
| Manufacturer | Schneider Electric SA |
| Model | PHC030 |
| Maximum Line Current | 5 A |
| Maximum Surge Current | 10 kA |
| Product Series | PHC |
| Product Type | Surge Suppressor/Protector |
| Vendor Name | Asco Power Technologies |
| Weight (Approximate) | 8 oz |
| Width | 2.4", 1.8" |
Not found
