APC by Schneider Electric Rack PDU 2G, Switched, ZeroU, 30A, 100-120V, (24) 5-20R

Model: AP8932

Category: AV Power

Brand: Apc - American Power Conversio

Dealer pricing

APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.

Brand Name Dell EMC
Circuit Breaker Yes
Color Black
Cord Length 10 ft
Depth 1.8"
Environmental Certification RoHS, REACH
Environmentally Friendly Yes
Height 70.5"
Input Current 30 A
Input Receptacles NEMA L5-30P
Input Voltage 120 V AC
Limited Warranty 2 Year
Model AP8932
Mount Type Rack-mountable
Mounting Orientation Horizontal/Vertical
Number of Cord/Cable 1
Output Receptacles 24 x NEMA 5-20R
Output Voltage 120 V AC
PDU Type Switched
Plug/Connector Type NEMA L5-30P
Power Rating (VA) 2880 VA
Product Type PDU
Protection Type Overload Protection
Rack Height 0U
Receptacle Detail 24 x NEMA 5-20R
Receptacle Type NEMA 5-20R
Vendor Name Apc - American Power Conversio
Weight (Approximate) 17.27 lb
Width 2.2"

Not found