Altronix EoC and PoE/PoE+ Transceiver

Model: EBRIDGE100ST

Category: Media Converters

Brand: Altronix Corp.

Dealer pricing

eBridge100ST EoC transceiver transmits data at 100Mbps, Full Duplex over Coax cable to a paired eBridge receiver and provides power in a PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options (see compatibility list below/Altronix.com) and is powered by an external midspan, such as the Altronix Netway series. The receiver passes PoE+ power over the same coax cable to the eBridge100ST transceiver, which, in turn, passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices. They can be installed at distances greater than 300m. They provide a simple way to replace legacy analog products with new IP devices over existing coax. eBridge100ST is compatible with the following Altronix receivers: eBridge100RM, eBridge400PCRM, eBridge800PCRM or eBridge1600PCRM.

Brand Name Altronix
Depth 1.1", 2.6"
DVI No
Environmental Certification RoHS
Environmentally Friendly Yes
Ethernet Technology Fast Ethernet
Height 2.6", 2.3", 1.1"
Limited Warranty Lifetime
Management Port No
Manufacturer Altronix Corporation
Model EBRIDGE100ST
Maximum Distance Supported 1640.42 ft
Maximum Extended Range 1640.42 ft
Media Type Supported Twisted Pair
Network (RJ-45) Yes
Network Technology 10/100Base-TX
Number of PoE+ (RJ-45) Ports 1
Packaged Quantity 1
Power Source PoE+
Product Line eBridge
Product Type Transceiver/Media Converter
Total Number of Ports 1
Transmitter Weight (Approximate) 3.52 oz
USB No
Vendor Name Altronix Corp.
Weight (Approximate) 3.52 oz
Width 2.3"