Altronix ACM4E Power Module
Altronix ACM4E Power Module

Altronix ACM4E Power Module

Model: ACM4E

Category: Access Power, Access Power Supplies

Brand: Altronix Corp.

Dealer pricing

Altronix ACM4E converts one (1) 12 to 24 VAC or VDC input into four (4) independently controlled fuse protected outputs. These power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. ACM4E will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. Units are designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs.
Main Features
  • 4 Output Access Power Controller in Encosure.
  • Converts (1) 12 to 24 volt AC or DC input into (4) fused power outputs.
  • Individually selectable Fail-Safe/Fail-Secure outputs or dry form "C" contacts.
  • Fire alarm disconnect is selectable by output.
  • UL and cUL listed.

Brand Name Altronix
Category Type Access Power Supplies
Depth 3.5"
Environmental Certification RoHS
Environmentally Friendly Yes
Height 8.5"
Input Voltage 12 V DC
Limited Warranty Lifetime
Manufacturer Altronix Corporation
Model ACM4E
Output Voltage 12 V DC
Packaged Quantity 1
Product Series ACM
Product Type Power Module
Vendor Name Altronix Corp.
Weight (Approximate) 6.60 lb
Width 7.5"

recommended items