Altronix ACM4CB Power Module

Model: ACM4CB

Category: Access Power, Access Power Supplies

Brand: Altronix Corp.

Dealer pricing

ACM4CB converts one (1) 12 to 24 volt AC or DC input into four (4) independently controlled Class 2 Rated Power Limited PTC protected outputs. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. The unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. Unit is designed to be powered by one common power source which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the four (4) outputs.

Brand Name Altronix
Category Type Access Power Supplies
Certifications & Standards

UL294

Depth 5.1"
Environmental Certification RoHS
Environmentally Friendly Yes
Height 3.6", 1.3", 5.1"
Input Voltage 12 V DC
Limited Warranty Lifetime
Manufacturer Altronix Corporation
Model ACM4CB
Output Voltage 12 V DC
Product Series ACM
Product Type Power Module
Vendor Name Altronix Corp.
Width 3.6", 1.3"