IXW-HWCBP HAND WAVE CALL BOX

The IXW-HWCBP hand wave call sensor is weather resistant and includes the SBX-2G/A surface mount box. It also includes the PS-POE to power the sensor, which can be mounted inside the SBX-2G/A.

The PS-POE is powered from either a PoE network drop or from the LAN 2 output on an IX Series door station that is connected to a PoE+ switch. The PS-POE provides power to the touchless sensor. The touchless sensor provides a form C dry contact output that can be connected to the trigger input of a IX Series door station. Doing so allows a visitor to place a call without touching the call button on the door station.

The touchless sensor will be illuminated blue while in standby and turn green when activated.

Main Features

• Weather resistant
• Includes the SBX 2G/A surface mount box and PS POE splitter to power the sensor
• Powered from either a PoE network drop or from the LAN 2 output on an IX Series door station (requires PoE+ switch)
• Form C dry contact output can be connected to the trigger input of an IX Series door station
• Allows visitors to place a call without touching the call button on the door station
• Sensor is illuminated in blue while in standby and turns green when activated

Specs

• Power Source: PoE (IEEE 802.3af class 0)
• Power Draw:30mA standby, 50mA active
• Sensor Type:Infrared LED with LED ring
• Detection range: 0-10cm
• Contact rating:30VAC/DC, 3A
• Material of panel:18-Gauge stainless steel
• Operating Temp: -4° ~ 131°F (-20° ~ 55°C)
• Dimensions: 4-13⁄16” H x 4-⁷⁄8” W x 4” D