The Glass Break Detector is a fully-supervised, tamper-protected, ceiling- or wall-mounted unit. It communicates with the 2GIG Control Panel using the 345 MHz frequency. The detector provides a 15 ft (4.6 m) maximum detection range, 360° maximum horizontal sensing angle, and dual-stage glass break detection.
Benefits
- Monitors for the sound of breaking glass
- Two test LEDs
- Dual shatter recognition technology
Main Features
- 360˚ range
- Tamper protected
- Fully supervised
- Lithium battery
- ETL listed
- Wireless Signal Range 300 ft (91.44 m), open air, with Wireless Control Panel
- Code Outputs Alarm; Alarm Restore; Tamper; Tamper Restore; Supervisory; Low Battery
- Transmitter Frequency 345.000 MHz (crystal controlled)
- Unique ID Codes Over one (1) million different code combinations
- Supervisory Interval 70 minutes
- Sensor Type Single microphone, dual stage thud, and crash
- Maximum Horizontal Sensing Angle 360° for ceiling mount or 180° for wall mount
- Dimensions (D x H) 4.55 x 1.9 in (11.56 x 4.83 cm)
- Weight (including battery & bracket) 5.1 oz (144.6 g)
- Housing Material ABS Plastic
- Color White
- Operating Temperature 32°‐120° F (0°‐49° C)
- Relative Humidity 5‐90% Non‐Condensing
- Battery (installed) Two (2) CR 123A 3V or equivalent Lithium batteries
- Approved Glass Break Simulator FG-701 Glassbreak Simulator
- Certification Anatel, ETL, FCC, IC, IFETEL, and NOM
